By maris on Tuesday, November 19, 2002 - 12:28 pm:
Dear collegues! I'll greatly appreciate receiving any information about the method for quantification of the Dimethylsulphate at ppb/ppm levels.
Thank you in advance.
By Anonymous on Wednesday, November 20, 2002 - 07:53 am:
Try a Supel-Q-Plot column from Supelco. It works well for sulfides. Obviously, you will need to use either a FPD or MS detector since you will not get a response with an FID. I have also had success using a DB-5 column.
Regards,
Chris
By maris on Wednesday, November 20, 2002 - 11:28 am:
Thank you, Chris
Posting is currently disabled in this topic. Contact your discussion moderator for more information.