Acetaldehyde in beer

Chromatography Forum: GC Archives: Acetaldehyde in beer
Top of pagePrevious messageNext messageBottom of pageLink to this message  By Hai Thanh Le on Wednesday, June 9, 2004 - 08:41 pm:

Dear all,

I am using GC/Headsapce 6890/7694 from Agilent to analyze some esters and alcohols in beer. Some compounds are good, but some have very bad results compared to check sample, although the calibration curves of those compounds are very straght. Acetaldehyde are 40% lower than the check sample. Others are higher. The thing is the errors are quite stable : 40;42; 38% etc..

I really do not know what is the cause of that. Anyone have experience on this situation please help me .

Thank, thank you very much..


Hai


Top of pagePrevious messageNext messageBottom of pageLink to this message  By Anonymous on Saturday, June 19, 2004 - 04:51 pm:

Your oven temp of the headspace or injection port is too hot.


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: