Tandem techniques

Chromatography Forum: LC-MS & GC-MS Archives: Tandem techniques
Top of pagePrevious messageNext messageBottom of pageLink to this message  By C.Allan on Tuesday, May 18, 1999 - 12:45 am:

Should we ask questions on LC-MS here or will there be a separate discussion page set up?


Top of pagePrevious messageNext messageBottom of pageLink to this message  By Moderator, Chromatography Forum on Tuesday, May 18, 1999 - 10:07 am:

Sure, feel free to include LC-MS topics in the LC Message Board. If there's sufficient discussion specific to LC-MS, we'll set up a separate topic area in the near future.


Top of pagePrevious messageNext messageBottom of pageLink to this message  By Anonymous (olesik4.mps.ohio-state.edu - 128.146.33.161) on Sunday, July 18, 1999 - 05:05 pm:

How about SFC (supercritical fluid chromatography)? SFC-MS, SFC-FID, etc.


Top of pagePrevious messageNext messageBottom of pageLink to this message  By Moderator (ppp-41-pm1-beaverton.spiretech.com - 209.210.100.41) on Sunday, July 18, 1999 - 10:43 pm:

Absolutely. Again, if there's sufficient discussion specific to SFC, we'll set up a separate message area, but for now, just include your questions in the LC Message Board.


Top of pagePrevious messageNext messageBottom of pageLink to this message  By M.J.Bogusz on Tuesday, August 10, 1999 - 07:21 am:

I am writing a review on the application of LC-MS in forensic sciences. In order to cover possibly all (also unpublished) sources, I would be grateful for short information from colleagues working in forensic fields, concerning the type of instrument used, applications, and publications, if any. All data will be cited. Thank you.
Prof.Dr.M.J.Bogusz
Inst.of Forensic Medicine
Klinikum RWTH, 52057 Aachen, Germany.


Top of pagePrevious messageNext messageBottom of pageLink to this message  By Hu Yulan on Thursday, May 20, 2004 - 09:02 pm:

I am currently using LC-MS/MS to quantitate. Does anybody know which method is more sensitive, SIR or MRM?


Posting is currently disabled in this topic. Contact your discussion moderator for more information.