By Nicole on Thursday, September 2, 1999 - 08:07 am:
Hi Our lab is getting a 6 position column selector to add flexability to our experiments. This instrument will run in conjunction with our Millenium software setup. Please give feedback on this instrument and if you found it easy to setup and interface with Waters Millenium 3.02.01 software.
Thank You
By David A. Isom on Thursday, October 28, 1999 - 01:59 pm:
Hi! I have setup many column selectors on the Waters systems this year already. It's really easy. First though, you must decide whether you will be performing random access with the selector or not. If so, you will need 4 free relays available from the back of the waters injector. Then you will program the software to use the relays to switch back and forth to select the proper column location. E-mail me with a contact number and I will fax you back the written protocol.
By Kurt Iwertowski on Sunday, October 31, 1999 - 01:26 pm:
Hello to all interested in the LabPRO column selectors from Rheodyne.
Note, that Rheodyne makes available installation procedures (can be send as a MS word doc file) for the most frequently seen HPLC systems.The local system integrator (see Dave Issom's mail) is responsible for the installation and backup.
If you are interested, I recommend to send a short mail explaining your background and reason for the requrement including the type of system you own or intend to acquire either to Dave or to to
Barbara Spruce , Technical Support Mgr.
bspruce@rheodyne.com.
Kurt Iwertowski (kiwertowski@rheodyne.com)
-working in Europe for Rheodyne.
Posting is currently disabled in this topic. Contact your discussion moderator for more information.